Rubber Coated Hex Dumbbells (Pair)
Price range: KSh 2,250.00 through KSh 18,000.00
Rubber coated hex dumbbells in one-piece forged construction, with contoured chrome handles and the weight embossed on the head. Available from 2.5 kg right up to 50 kg, sold as pairs.
- One-piece forged construction — nothing to work loose
- Contoured chrome handles for a snug grip
- Rubber coating protects floors and equipment
- 2.5 kg to 50 kg, weight embossed on the head
From KSh 2,250 per pair
Rubber coated hex dumbbells are the standard in every commercial gym for good reason. They do not roll, they do not chip the floor, and one-piece forging means there is nothing that can ever come loose.
One-piece forged construction
The head and handle are forged as a single piece. Cheaper dumbbells screw or weld the heads onto a bar, and that joint is where they eventually fail — usually by developing a wobble long before anything dramatic happens.
A forged dumbbell has no joint at all. That is why these are described as built to take a pounding, and why gyms specify them.
Why hexagonal
Hex heads do not roll. Put a pair down mid-set and they stay exactly where you left them, which matters as much for safety as for tidiness.
The flat faces also let you use them as push-up handles, and they stack neatly on a rack rather than needing individual cradles.
The rubber coating
Rubber protects your floor, protects the dumbbells themselves, and cuts the noise when they are set down. In an apartment or a shared building, that last point is what makes home training possible at all.
The contoured chrome handle is shaped for a snug fit in the hand, so your grip stays comfortable through high-rep sets.
Rubber coated hex dumbbells specifications
- Construction: one-piece forged
- Handles: contoured chrome
- Coating: rubber
- Marking: weight embossed in kg on the head
- Weights available: 2.5, 5, 7.5, 10, 12.5, 15, 17.5, 20, 22.5, 25, 27.5, 30, 35, 40, 45, 47.5 and 50 kg
- Sold as: pairs
- Use: home or commercial
Choosing your weights
Most home setups start with two or three pairs rather than a full rack. A light pair for raises and rotator work, a medium pair for curls and presses, and a heavier pair for rows and lunges covers almost everything.
The 2.5 kg increments through the middle of the range are what let you keep progressing rather than jumping past where you are.
Who they suit
Home gyms and commercial floors equally. If you are buying once and want equipment that will still be fine in fifteen years, forged rubber hex is the answer.
Pair them with a bench from our bench range, or a rack from the gym accessories selection.
Price in Kenya
From KSh 2,250 per pair. Price varies by weight — tell us which pairs you want and we will confirm the total.
Common questions
Are rubber coated hex dumbbells sold singly or in pairs?
In pairs. Tell us the weights you want when you order.
What weights are available?
Everything from 2.5 kg to 50 kg, in 2.5 kg steps up to 30 kg and 5 kg steps above that.
Will they damage my floor?
Far less than bare iron. The rubber coating is there to protect floors, equipment and your ears.
Are they suitable for a commercial gym?
Yes, they are designed for commercial use. One-piece forging is what makes them survive it.
Related products
Adjustable Selectorized Dumbbell Set (2.5kg – 24kg)
An adjustable dumbbell set 24kg that changes weight with a turn of a dial — from 2.5 kg up to 24 kg. Premium steel plates on a high-density nylon base, with a safety interlock that keeps plates from falling off.
- 2.5 kg to 24 kg, adjusted by dial
- Premium steel plates, high erosion resistance
- High-density nylon base and handle
- Safety interlock catch on the plates
Now KSh 19,500 (was KSh 21,500).
Dumbbell Bars with Spinlocks Pair
A pair of chrome spinlock dumbbell bars that turn the plates you already own into adjustable dumbbells. Rubber-coated grips, contoured chrome handles and four spinlock collars for fast plate changes.
- Sold as a pair, 1.5 kg per bar
- 40 cm (16") long with a 12.5 cm (5") grip
- Four spinlock collars included
- Suitable for standard 1" weight plates
Now KSh 2,800 (was KSh 3,000).
Foldable Adjustable Dumbbells Incline Decline Sit Up Bench
A foldable adjustable sit up bench that covers incline, flat and decline press work plus abs, then folds down to 880 mm and slides away. Rated to a 300 kg safe load on a steel frame.
- Incline, flat and decline positions
- 300 kg (660 lb) safe load bearing
- Padded leg bar rollers hold you in place
- Folds from 1240 mm to 880 mm, weighs 14 kg
Now KSh 19,500 (was KSh 20,000).
JX-DS913 Home Gym Single Station
The JX Fitness 913 is a home gym single station covering ten or more exercises from one frame. A 63 kg weight stack delivers up to 135 kg of resistance through a sealed roller bearing pulley system.
- 63 kg stack providing up to 135 kg maximum resistance
- Chest press, pec deck, lat pulldown, leg extension and more
- Double ratio sealed roller bearing pulley system
- 206 x 105 x 180 cm, 135 kg maximum user weight
KSh 85,000
Neoprene / Vinyl Aerobic Dumbbells
Neoprene aerobic dumbbells in hexagonal cast iron with a vinyl-dipped coating, from 1 kg to 5 kg. The coating grips when your hands are sweaty and protects your floor and other equipment.
- 1 kg to 5 kg — choose the weight you need
- Vinyl-dipped cast iron, super-grip neoprene finish
- Hexagonal: they stack and they do not roll
- Sold as a pair of each weight
From KSh 1,000
Power Twister
A power twister bar with double carbon steel springs and non-slip handles. Bend it against the spring and your chest, shoulders and arms work hard — in an office, a living room or a hotel room.
- Available in 20, 30, 40, 50 and 60 kg
- Double spring — safer and more heavy duty
- High-quality carbon steel with non-slip handles
- Portable: home, office or travel
KSh 1,500
Rubber Coated Weight Plates (Standard)
Rubber coated weight plates with a cast iron core, a tough rubber casing and recessed tri-grip handles. Sized for standard bars, with a 30 mm hole, and embossed with the weight in kilograms.
- 2.5 kg to 20 kg, sold as singles
- Cast iron core in a premium rubber casing
- Tri-grip handles — fast loading, easy carrying
- 30 mm hole, fits standard 25–28 mm bars
From KSh 4,000
Workout Gym Incline / Decline Bench with Squat Rack
An incline decline bench with squat rack that turns a barbell into a complete gym. A sliding seat track keeps your alignment right, and a dual-function leg developer covers legs and abs. Rated to 400 kg.
- Incline, decline and flat, with an integrated squat rack
- 400 kg product load bearing on a steel frame
- Sliding seat and back pad track for proper alignment
- Dual-function leg developer, folding design, 31 kg
KSh 35,000 — weights and bar not included.
