Multi Power Tower Station with Pull Up Bar & Bench
Original price was: KSh 55,000.00.KSh 48,000.00Current price is: KSh 48,000.00.
A multi power tower station that covers pull-ups, dips, push-ups and hanging core work on one steel frame. The backrest adjusts through five positions and the whole thing runs on your own bodyweight.
- Pull-up bar, dip station and low push-up grips
- 5-position adjustable backrest
- Breathable PU leather arm and back cushions
- Stable steel frame with a safety lock nut
Now KSh 48,000 (was KSh 55,000).
Out of stock
Bodyweight training gets dismissed until someone tries a set of strict pull-ups. A multi power tower station puts pull-ups, dips, push-ups and hanging leg raises into one frame that costs a fraction of a cable machine.
What a multi power tower station covers
The bar at the top handles pull-ups and chin-ups — the best back and bicep exercise there is. The parallel bars handle dips, which build triceps and lower chest better than most machines.
Lower grips let you do raised push-ups with a deeper range than the floor allows. Meanwhile the padded backrest and armrests turn the same frame into a station for knee and leg raises, which is where your abs and the muscles around your spine get worked.
The five-position backrest
The backrest is anti-bending and anti-tilting, and it adjusts forward or backward through five positions. Getting that angle right is what makes hanging core work efficient rather than a wrestle with the frame.
Because it adjusts, one station suits users of different heights properly rather than approximately.
Comfort where you press against it
The arm and back cushions are breathable, odourless PU leather over foam. That matters on dips and leg raises, where your forearms and back carry your entire bodyweight for the length of the set.
The handles have large grips, which spread the load across your palms instead of concentrating it on a narrow bar.
Frame and stability
The frame is high-quality steel with a highly resistant coating. A triangular bracket gives a stable structure at the cantilevered joint, and a safety lock nut on the screw keeps that joint tight over time.
Stability is not a comfort question on a power tower. If the frame rocks when you kip a pull-up, you will stop using it.
Multi power tower station specifications
- Stations: pull-up bar, dip handles, low push-up grips, backrest for core work
- Frame: stable, high-quality steel with highly resistant coating
- Backrest: adjustable forward or backward, 5 positions, anti-bending and anti-tilting
- Cushions: breathable, odourless PU leather
- Handles: large grips for comfort
- Joint: triangular bracket with safety lock nut
Who a multi power tower station suits
Anyone building a home gym without weights, anyone who wants to get their first pull-up, and anyone short of space. One frame in a corner covers the whole upper body.
Pair it with a bench from our bench range, or browse the rest of our strength equipment.
Price in Kenya
It is KSh 48,000, down from KSh 55,000 — a KSh 7,000 saving. For four exercise stations in one steel frame, it is one of the highest-value pieces in the strength range.
Common questions
Can beginners use a multi power tower station?
Yes. Start with negatives on the pull-up bar and assisted dips, and build from there. Knee raises are accessible on day one.
Is the backrest adjustable?
Yes, forward or backward through five positions.
Is the frame stable enough for pull-ups?
The triangular bracket and safety lock nut are specifically there to keep the cantilevered joint rigid under load.
How much space does it need?
Roughly the footprint of an armchair, plus clear height above the bar for a full pull-up.
Related products
20KG Adjustable Dumbbell Set
A 20kg adjustable dumbbell set in heavy-duty cast iron — 10 kg per hand — with knurled bars and fourth-generation double safety spinlock collars. Plates are embossed with their weight for quick setup.
- Left hand 10 kg + right hand 10 kg = 20 kg total
- Heavy-duty cast iron plates, weight embossed on both sides
- 4th generation double safety spinlock collars
- Upgraded non-slip knurled handle
Now KSh 8,200 (was KSh 9,000).
Adjustable Selectorized Dumbbell Set (40kg)
An adjustable selectorized dumbbell set that turns a dial to move from 5 kg to 40 kg. Seventeen settings replace an entire rack, and the moulding around the plates keeps every lift quiet.
- 5 kg to 40 kg, adjusted by turning a dial
- 17 weight settings in one dumbbell
- Durable moulding for smooth, quiet lift-off
- 45 x 25 x 25 cm each — store it anywhere
KSh 26,000
JX-DS913 Home Gym Single Station
The JX Fitness 913 is a home gym single station covering ten or more exercises from one frame. A 63 kg weight stack delivers up to 135 kg of resistance through a sealed roller bearing pulley system.
- 63 kg stack providing up to 135 kg maximum resistance
- Chest press, pec deck, lat pulldown, leg extension and more
- Double ratio sealed roller bearing pulley system
- 206 x 105 x 180 cm, 135 kg maximum user weight
KSh 85,000
Neoprene / Vinyl Aerobic Dumbbells
Neoprene aerobic dumbbells in hexagonal cast iron with a vinyl-dipped coating, from 1 kg to 5 kg. The coating grips when your hands are sweaty and protects your floor and other equipment.
- 1 kg to 5 kg — choose the weight you need
- Vinyl-dipped cast iron, super-grip neoprene finish
- Hexagonal: they stack and they do not roll
- Sold as a pair of each weight
From KSh 1,000
Power Twister
A power twister bar with double carbon steel springs and non-slip handles. Bend it against the spring and your chest, shoulders and arms work hard — in an office, a living room or a hotel room.
- Available in 20, 30, 40, 50 and 60 kg
- Double spring — safer and more heavy duty
- High-quality carbon steel with non-slip handles
- Portable: home, office or travel
KSh 1,500
Rubber Coated Hex Dumbbells (Pair)
Rubber coated hex dumbbells in one-piece forged construction, with contoured chrome handles and the weight embossed on the head. Available from 2.5 kg right up to 50 kg, sold as pairs.
- One-piece forged construction — nothing to work loose
- Contoured chrome handles for a snug grip
- Rubber coating protects floors and equipment
- 2.5 kg to 50 kg, weight embossed on the head
From KSh 2,250 per pair
Rubber Coated Weight Plates (Standard)
Rubber coated weight plates with a cast iron core, a tough rubber casing and recessed tri-grip handles. Sized for standard bars, with a 30 mm hole, and embossed with the weight in kilograms.
- 2.5 kg to 20 kg, sold as singles
- Cast iron core in a premium rubber casing
- Tri-grip handles — fast loading, easy carrying
- 30 mm hole, fits standard 25–28 mm bars
From KSh 4,000
Workout Gym Incline / Decline Bench with Squat Rack
An incline decline bench with squat rack that turns a barbell into a complete gym. A sliding seat track keeps your alignment right, and a dual-function leg developer covers legs and abs. Rated to 400 kg.
- Incline, decline and flat, with an integrated squat rack
- 400 kg product load bearing on a steel frame
- Sliding seat and back pad track for proper alignment
- Dual-function leg developer, folding design, 31 kg
KSh 35,000 — weights and bar not included.
