Multi Power Rack System Gym Equipment Power cage Squat Rack

A multi power rack squat cage is what lets you squat and press heavy on your own. Set the safety rods below your working depth, and a failed rep ends with the bar on steel rather than on you.

Built from 60 x 60mm steel

The PRC80 is constructed from 60 x 60 mm steel tube, which is what gives it the strength to handle serious squatting and pressing. Thinner tube flexes under load, and flex is what makes a rack feel unsafe long before it actually fails.

Both main side frames are welded together at the factory rather than bolted on site. That single design decision is the main reason this rack is more rigid than others in its class.

Safety rods and J-hooks

Solid steel adjustable safety rods and J-hooks come fitted, and both move through twelve adjustment holes. The highest position sits 1700 mm from the floor, which easily caters for squatters over 207 cm tall.

Set the rods just below the bottom of your squat. Then you can push to genuine failure knowing exactly where the bar will land.

The chinning bar

The crossbar at the top is a generous 32 mm in diameter, which gives a firm grip for chins and pull-ups. Thin bars roll in your hands and cut into your fingers on a heavy set; a thick bar spreads the load.

That also means the rack covers your back training as well as your legs and chest, from the same footprint.

Multi power rack squat cage specifications

• Footprint: 1100 mm wide x 1060 mm deep x 2100 mm high
• Steel: 60 x 60 mm tube
• Chinning bar: 32 mm diameter
• Weight plate storage: 2 positions
• Adjustment holes: 12, highest at 1700 mm from the floor
• Suits squatters up to and beyond 207 cm tall
• Fittings: solid steel adjustable safety rods and J-hooks
• Feet: non-slip rubber end caps
• Assembly: quick and easy

Storage and floor protection

Two weight plate storage positions keep your plates on the rack rather than on the floor, which matters both for tidiness and for not stubbing a toe on a 20 kg disc. Non-slip rubber end caps protect your floor and stop the rack shifting.

Who this power rack suits

Anyone training alone with a barbell, home gyms, estate gyms and commercial floors. It is the single piece of equipment that makes solo heavy lifting safe, which is why every serious setup has one.

Pair it with our barbells, a bench from the bench range, and plates to load it.

Price in Kenya

KSh 65,000. Given the 60 x 60 mm steel, factory-welded side frames and a 2100 mm height, it is priced against racks with considerably thinner tube.

Common questions

How much space does a multi power rack squat cage need?

The footprint is 1100 mm wide by 1060 mm deep, with 2100 mm of height. Allow ceiling clearance for pull-ups on top of that.

Will it suit tall lifters?

Yes. Twelve adjustment holes with the highest at 1700 mm cater for squatters over 207 cm.

Are safety rods included?

Yes, solid steel adjustable safety rods and J-hooks are fitted.

Is it hard to assemble?

No. The side frames arrive welded, so assembly is quick and straightforward.